Best 3D Printers for Beginners

Along with the surprising speed of technological evolution came the era of 3D printers. Nowadays, you can visualise, sketch and print almost anything that comes to your mind.

If you’re new to the fascinating and complex world of petite printing machines and want to purchase one, we can help you make a decision.

Show more

Best Selection

1. Anycubic Photon Mono X

The Anycubic Photon Mono X is the company’s first move into the field of large-format monochrome MSLA printers. The Mono X offers large prints and lighting-fast layer cure times at high resolution, with a 192 x 120 x 245 mm build capacity and a 4K monochrome screen. Full Review

  • Large build volume
  • High-quality prints from the 4K LCD
  • Minimal setup

The Anycubic Photon Mono X is the company’s first move into the field of large-format monochrome MSLA printers. The Mono X offers large prints and lighting-fast layer cure times at high resolution, with a 192 x 120 x 245 mm build capacity and a 4K monochrome screen. Full Review

2. Artillery Sidewinder X1

The Artillery Sidewinder X1 is the best starter 3D printer that stands out among its cheap competitors with the X1’s direct drive system, AC heated bed, and extremely quiet motherboard and fans. In addition, this 3D printer appeals to tinkerers and designers due to its extensive 300 x 300 x 400 mm build capacity and elegant look. Full Review

  • Superfast heating
  • Whisper silent
  • Direct drive Titan extruder

The Artillery Sidewinder X1 is the best starter 3D printer that stands out among its cheap competitors with the X1’s direct drive system, AC heated bed, and extremely quiet motherboard and fans. In addition, this 3D printer appeals to tinkerers and designers due to its extensive 300 x 300 x 400 mm build capacity and elegant look. Full Review

3. Creality Ender 3 V2

Among low-cost 3D printers is Creality that establishes a new standard for budget printers with its advanced features. It’s the same old Ender 3 experience, but with updated hardware such as a 32-bit mainboard, quiet stepper motor drivers, a much cleaner appearance and design, plus a slew of other, slight, changes. Nevertheless, there is plenty to the Ender 3 V2 that makes it worth the excitement. Full Review

  • HD colour screen
  • Good print quality
  • Belt tensioner

Among low-cost 3D printers is Creality that establishes a new standard for budget printers with its advanced features. It’s the same old Ender 3 experience, but with updated hardware such as a 32-bit mainboard, quiet stepper motor drivers, a much cleaner appearance and design, plus a slew of other, slight, changes. Nevertheless, there is plenty to the Ender 3 V2 that makes it worth the excitement. Full Review

4. Flashforge Finder 3D Printer

The user-friendly Flashforge Finder debuted almost a decade ago. Yet, it has remained relevant thanks to its accessibility, quality and approachability. The Flashforge Finder covers practically all of the basics for entry-level 3D printers. This tiny guy prints silently and only chirps when it starts or when something interesting happens in the system. Full Review

  • Quiet
  • Clear touchscreen
  • Removable build plate

The user-friendly Flashforge Finder debuted almost a decade ago. Yet, it has remained relevant thanks to its accessibility, quality and approachability. The Flashforge Finder covers practically all of the basics for entry-level 3D printers. This tiny guy prints silently and only chirps when it starts or when something interesting happens in the system. Full Review

5. Monoprice Voxel

Monoprice, a California-based electronics company, has been a dominant player in the budget 3D printer marketplace. However, despite being a budget 3D printer the Monoprice MP Voxel appears to be a quality printer built to accomplish precisely that. With a lengthy list of useful features that improve everyday usage and a fully enclosed, compact design, this 3D printer might be a desirable option for those who just want to begin with printing. Full Review

  • Easy to use
  • Affordable
  • Compact design

Monoprice, a California-based electronics company, has been a dominant player in the budget 3D printer marketplace. However, despite being a budget 3D printer the Monoprice MP Voxel appears to be a quality printer built to accomplish precisely that. With a lengthy list of useful features that improve everyday usage and a fully enclosed, compact design, this 3D printer might be a desirable option for those who just want to begin with printing. Full Review

6. Ultimaker S5

Ultimaker, a Dutch 3D printer firm founded in 2011, has established itself as a frontrunner in the open-source 3D printing community. According to various 3D printer reviews, Ultimaker is undoubtedly one of the most vicious leading brands in the 3D printer industry, with a greatly valued line of professional-grade 3D printers and one of the most popular 3D printing slicers in Cura. Full Review

  • Exceptional print quality
  • Large build volume
  • Excellent multi-material capabilities

Ultimaker, a Dutch 3D printer firm founded in 2011, has established itself as a frontrunner in the open-source 3D printing community. According to various 3D printer reviews, Ultimaker is undoubtedly one of the most vicious leading brands in the 3D printer industry, with a greatly valued line of professional-grade 3D printers and one of the most popular 3D printing slicers in Cura. Full Review

Detailed Reviews

Anycubic Photon Mono X
Anycubic Photon Mono X

Big prints at high resolution

Visit Website
  • Large build volume
  • High-quality prints from the 4K LCD
  • Minimal setup
  • Lower energy usage

Mono X’s centrepiece is a 22.60 cm monochrome LCD. Monochrome screens have quickly become what might be called the new standard in newer Masked Stereolithography printers. The advantages are:

 

  • Quicker cure times
  • Lower energy usage
  • Longer lifespan than previously used RGB screens

 

Anycubic’s Mono X resin printer provides consumers with customisable intensity control and recommends lowering the UV-light intensity to 70-80% to extend the lifespan even more. Also, the two big fans give their best to adjust at the back, and they are reticent in doing so. Together with the smooth and near-silent movement of the Z-axis, the Mono X is a relatively simple 3D printer even though it’s pretty bulky (270 x 290 x 470 mm).

 

The screen features a 4K resolution of 3840 x 2400 pixels, distributed across a printable area of 192 x 125 mm. That gives an XY-pixel size of 50 microns with a 192 x 125 x 250 mm total build volume.

 

The Mono X’s Z-axis travels with stability and accuracy thanks to a dual linear rail and anti-backlash nut combination. In addition, its build bed levelling system is simple, as it is with most resin printers.

 

Anycubic Photon Mono X package includes the following 3D printing gadgets:

 

  • User Manual
  • SD-Card
  • Toolset
  • SD-Card Reader
  • Scraper
  • Resin Vat
  • Platform
  • Power Cord
  • Service Card
  • WiFi Antenna
  • Gloves

 

The Anycubic Photon Mono X, encased in a stylish metal body and equipped with a clean UI, can produce high-quality printing with almost no effort and is the best small 3D printer with affordable pricing.

 

Anycubic Photon Mono X Specifications

Frame Dimension and Build Volume 270 x 290 x 470 mm, 192 x 120 x 245 mm
Layer Height 10+ microns
Bed-Leveling and Speed Semi-automatic, 60mm/s
XYZ Resolution 50 microns (3840 x 2400 pixels)
Z-axis position accuracy 0.01 mm
Materials 405 nm UV resin and third-party materials
File types STL
  • Superfast heating
  • Whisper silent
  • Direct drive Titan extruder
  • Ribbon cables

Artillery Sidewinder X1, a large desktop 3D printer with top-tier features such as robust chassis, direct drive extruder technology, and a large, fast-heating print bed, falls into the category of the best FDM machines.

 

The usage of ribbon cables is one of the prominent reasons the Sidewinder distinguishes itself from its competitors. To be completely honest, this feature pushes the X1 straight up to the top of the design chain.

Another appreciated and rarely seen feature is the X1’s utilisation of large 20 x 60 mm extrusions for the bed rail and Z-axis. The Z-axis is powered by a dual lead screw system with anti-backlash nuts on the back and a connection belt with a pulley to keep them synchronised – a technique that tackles potential desyncing of the dual lead screw motors over time.

 

The print bed is at the core of any 3D printer. The heart of the Artillery Sidewinder X1 is a porous ceramic covered glass surface of 300 x 300 x 400 mm. The Sidewinder’s heated glass bed outperforms the competition, heating from room temperature to 60°C in about 45 seconds.

 

Sidewinder can print with various materials, but it reaches its full potential when printing with PLA regularly. With Sidewinder X1, you can easily make any custom physical objects that come to your mind.

 

You get the following 3D printing gadgets in the box when you buy the Artillery Sidewinder X1 3D printer:

 

  • Printer kit
  • Spool holder
  • USB drive
  • Power cable
  • Scraper
  • Toolbox
  • User manual
  • Warranty card

 

The Artillery Sidewinder X1 brings novelty to affordable Cartesian FDM printers, particularly its AC heated platform and reliable direct drive extruder. The printer strikes right out of the box with its elegant design, low operating noise levels, and good stock print quality.

 

Artillery Sidewinder X1 Specifications

Printing Technology FDM
Frame and Build Volume Aluminium, 300 x 300 x 400 mm
Layer Resolution 0.05 mm
Filament and Nozzle Size 1.75 mm, 0.4 mm
Materials PLA, ABS, flexible PLA, TPU, wood, PVA, HIPS
Print Speed 150 mm/s
Print Temperature 80°C to 240°C
  • HD colour screen
  • Good print quality
  • Belt tensioner
  • Quiet

Despite the various additional light-touch modifications to the machine, the Ender 3 V2 is essentially identical to the previous Ender 3. The same build volume of 220 x 220 x 250 mm, a single hot end powered by a Bowden extruder, offline printing via microSD, and auto bed-levelling probe.

 

A textured glass bed is one of the best print bed experiences you can get these days, and the Ender 3 V2 is no exception. When it’s hot, the filament sticks, but when it’s cool, it breaks free. You can also buy a detachable PEI-coated metal bed for Creality, which makes removing the filament much easier.

 

Layer height and belt tension are crucial, and there are easy-to-use methods that will improve the printer’s long-term performance. But, of course, it will not eliminate the need to change belts in the future. Still, a slight twist occasionally can help maintain the printer in good condition.

 

Prints are consistently good – easily as good as its predecessor’s, if not better, thanks to upgraded technology like new stepper motor drivers and dual Z-axis motors.

 

Creality has a revolutionary feature: a self-developed silent 32-bit motherboard with a 2560 chipset that reduces the printer’s noise to a fantastic 50 decibels, similar to a quiet suburb or a discussion at home.

The following 3D printing gadgets come in the Creality Ender 3 V2 package:

  • Creality Ender 3 V2 main units
  • Filament spool holder
  • Filament sample
  • SD card
  • Toolbox
  • Scraper
  • Power cable
  • Spare units
  • User manual

 

Most low-cost filament printers have a cheap LCD screen. However, Creality is genuinely the best home 3D printer with a freshly designed colour screen displaying a new user interface.

 

Creality Ender 3 V2 Specifications

Printing Technology FDM
Frame Dimension and Build Volume 475 x 470 x 620 mm, 220 x 220 x 250 mm
Layer Resolution 0.1 mm
Filament and Nozzle Size 1.75 mm, 0.4 mm
Materials PLA, ABS, PETG, TPU and third-party materials
Print Speed 180 mm/s
Print Temperature 100°C to 255°C
File types STL, OBJ
  • Quiet
  • Clear touchscreen
  • Removable build plate
  • Non-toxic prints

Flashforge Finder is the best intro 3D printer as it’s easy to use and has various features for an affordable price. Also, it only prints in non-toxic PLA, so you don’t need to worry about poisonous fumes or any hazards connected with printing materials like ABS. It also has all heated elements, such as the nozzle, covered to avoid accidental touching. Finally, the cables are all stowed away, so they can’t tangle with anything.

 

The Finder’s 8.89 cm touchscreen is straightforward to use. When you initially switch on the printer, you can see three options available, and then you are given additional settings. It makes finding what you’re searching for easy and untroubled.

 

The removable build plate is simple to put on and take off unless you’re printing something with a vast base, as it’s easy for prints to stick on. In addition, Flashforge promotes its manual bed levelling system (supported by a retractable switch) as a plus, stating that it provides more precise and more uncomplicated calibration.

 

Overall, printing using the Flashforge Finder is a lot of fun. It’s dependable, and the prints are lovely. In addition, it is capable of handling delicate detail and creating smooth surfaces.

 

With the Flashforge Finder 3D Printer, in the box come the following 3D printing gadgets:

  • 250g Random Colour Filament
  • Power Cable
  • USB Cable
  • Screwdriver
  • Unclogging Pin Tool
  • Wrench
  • Grease
  • Filament Guide Tube
  • Solid Glue
  • Teflon Tube
  • Quick Start Guide
  • After-sales Service Card

 

Though less expensive beginner 3D printers are available, the robust Flashforge Finder has numerous features that make it unique and easy to use – making it one of the best beginner 3D printers.

 

Flashforge Finder 3D Printer Specifications

Printing technology Fused Filament Fabrication (FFF)
Frame Dimension and Build Volume 420 x 420 x 420 mm, 140 x 140 x 140 mm
Layer Resolution 100 – 500 microns
XYZ Resolution X,Y: 11 microns / Z: 2.5 microns
Filament and nozzle diameter 1.75 mm and third-party filament, 0.4 mm
Materials PLA, PETG (for small prints)
File types OBJ/STL
Print bed PEI sheet on the glass
Best Price
  • Easy to use
  • Affordable
  • Compact design
  • Detachable heated platform

The Monoprice MP Voxel, initially priced at £250, is the best 3D printer under 500 pounds to provide beginners with a simple and feature-rich experience. It has a small build volume of 150 x 150 x 150 mm and features a complete enclosure, which is unusual for a Cartesian FDM printer at this cost. In addition, the transparent panels effectively keep the print progress visible to the user.

 

The Monoprice Voxel includes a heated platform that is both detachable and flexible, making finished 3D prints easy to remove. An extra build plate is also included with the printer, allowing customers to begin the new print procedure as soon as the previous one finishes.

 

The printer’s build plate can be heated to 60°C, which is acceptable for materials like PLA but may cause issues with other filament types like ABS. In addition, the Monoprice Voxel has aided the bed levelling system, simplifying the consumer’s critical calibration process. You can activate this function by a simple tap on the printer’s 7.11 cm full-colour touchscreen.

 

This basic 3D printer has an automatic filament feed system and easily interchangeable nozzles. It also has a built-in sensor that detects when the filament is low and, as a result, pauses the print until the material is recharged.

 

In the Monoprice Voxel box, aside from the printer, come the following 3D printing gadgets:

  • Spool Filament
  • AC Power Cord
  • Screwdriver
  • Unclogging Tool
  • Allen Wrench
  • Grease
  • Thank You Card
  • User Manual

 

Suppose you are a 3D printing enthusiast seeking a low-cost, dependable printer that can work for lengthy periods of time. In that case, the Monoprice Voxel represents the best hobby 3D printer, offering many functions, high print quality, and rapid printing for a reasonable price.

 

Monoprice Voxel Specifications

Printing Technology FDM/FFF
Frame Dimension and Build Volume 400 x 380 x 405 mm, 150 x 150 x 150 mm
Layer Resolution 0.05 – 0.4 mm
XYZ Resolution X,Y: 11 microns / Z: 2.5 microns
Filament and Nozzle Size 1.75 mm, 0.4 mm
Materials ABS, PLA, PETG, Exotics
Print Speed 10 – 100 mm/s
Print Temperature From 15°C to 60°C
Ultimaker S5
Ultimaker S5

Both professionals and beginners

Visit Website
  • Exceptional print quality
  • Large build volume
  • Excellent multi-material capabilities
  • Heated glass bed

The Ultimaker’s S5 build volume of 330 x 240 x 300 mm is its most appealing feature. In addition, the S5 3D printer supports dual extrusion and has an upgraded feeder system with a filament flow sensor that instantly pauses prints when the filament runs out.

 

The Ultimaker S5 is equipped with two interchangeable build plates:

 

  • Heated glass bed for ordinary usage.
  • Ultra-flat anodised aluminium bed for sophisticated engineering materials like ABS and PC.

 

Each build plate effortlessly hooks onto an extra-stiff cast aluminium heated platform. Ultimaker also includes a full-colour touchscreen display on the printer’s front, allowing even the most unskilled user to easily navigate and modify various settings. In addition, the print heard of the S5 is ultra-lightweight, thanks to a Bowden extrusion mechanism, and the printing process is rapid.

 

The dual extruder is built with a narrow filament route making printing easier with flexible materials like TPU. When Ultimaker revealed its new easy to use 3D printer, the firm also unveiled the new Ultimaker Tough PLA, a technical material designed for larger-scale prints. The Ultimaker S5 can print with up to two colours per print.

 

The Ultimaker S5 box contains the following 3D printing gadgets:

  • Glass Plate
  • Aluminium Plate
  • Spool holder with Material Guide
  • Power Cable
  • USB Stick
  • Print Core AA 0.4 (x2), Print Core BB 0.4 (x1)
  • XY Calibration Sheet- Glass Plate and Aluminium Plate
  • Calibration Card
  • Nozzle Cover (x3)
  • Tough PLA 750g, PVA 750g
  • Glue Stick, Oil, Grease
  • Hex Screwdriver 2mm

 

The Ultimaker S5 has a clean and straightforward appearance, thanks to the design. It is one of the best 3D printers that looks like a luxury machine that fits in the professional office environment and should be honourably presented for all visitors to see.

 

Ultimaker S5 Specifications

Dimensions, Assembly Type and Build Volume 495 x 585 x 780 mm, pre-assembled, 330 x 240 x 300 mm
Layer Resolution 0.25 mm nozzle: 150 – 60 micron/ 0.4 mm nozzle: 200 – 20 micron/ 0.8 mm nozzle: 600 – 20 micron
Print Temperature and Speed Up to 280°C, < 24 mm3/s
XYZ Resolution 6.9, 6.9, 2.5 micron
Print Head -Dual Extrusion with Soluble Support Material Swappable Print Cores

-Heated Build Plate with Active Leveling Open Filament System

Materials PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway, Third-Party materials

How to Choose the Right 3D Printer (Buyer’s Guide)

Not so long ago, 3D printers were restricted only to the industry sector and had high prices. Nowadays, consumer printers are obtainable almost at every corner, and more are arriving every day. Such variety comes with the benefits of lower prices, which means you can get an excellent printer for as low as £145. The tricky part is determining which one to buy.

Determine What You Want to Print

Before purchasing a 3D printer, you should know what you want to use it for and what you will print. Between 3D printing tools for your desk and industrial-scale manufacturing parts, there is a vast difference. Consider how frequently you plan to print, where you want to use the printed items, and how much time you are eager to commit to printing.

Pick a Printer

An FDM printer is popular among many starters. To produce 3D custom physical objects, these printers release heated materials and polymers known as filament. Other printing techniques employ vats of liquid resin, such as Digital Light Processing (DLP) and Stereolithography (SLA). The Selective Laser Sintering (SLS) technique uses powder instead of resin.

 

Some of the best beginner 3D printers are:

 

  • Creality Ender 3 V2
  • Monoprice Voxel
  • Artillery Sidewinder X1

SLA of FDM

FDM is an abbreviation for Fused Deposition Modelling printers. It produces items by heating filament, passing it through a tube, and extruding it into shape along the X, Y, and Z-axis. These printers are well-known for their horizontal layer lines and the work necessary to smooth final prints.

 

You can find either a Cartesian or Delta style frame construction FDM printer.

 

A Cartesian FDM printer moves the bed along the Y-axis while the X-axis and Z-axis move by their own motors. A Delta style frame construction FDM printer drives the extruder using three motors on uniformly spaced rods. That is a less desirable and less frequent design among the printers.

 

SLAStereolithography printers utilise a technique known as photo-solidification, in which a chemical process shapes layers. The photons concentrate on a single location, causing the SLA resin to harden. As a result, you can get smooth, high-quality printing with outstanding detail since SLA printers are very precise.

 

There are also other types of 3D printers available, but many people start with an FDM printer.

Search For Various Features

Important features can be all from material for printing, 3D printer software, multiple filament support, and others.

 

Filament printers employ spools of filament produced from various materials, most often plastics such as PLA, ABS, and PETG. In addition, there are other unusual materials available, such as bendable and wood-based filament.

 

Resin printers, such as SLA and DLP models, use liquid resins to produce objects. The options vary depending on the manufacturer. However, they are generally divided into a few categories: standard resin, tough resin, and medical-grade resin.

 

3D printers rely on software from two sources: the printer itself and the computer on which you develop 3D printing files.

 

Your computer’s software is a slicer – slicing is when you produce a file for printing (the most common 3D printer file type is gcode). There are several slicing systems available online, and the two most prominent are:

 

  • Cura – An open-source 3D printer slicing system developed by Ultimaker.
  • Slic3r – A free gcode slicing system created by Alessandro Ranellucci.

 

The printing method for dual filament support (dual extruder) 3D printers is the same as single-extruder 3D printers. The only difference is that the printer swaps filaments at regular intervals.

Dual filament support isn’t necessary for multicoloured prints, although it does help. Instead of focusing on multicoloured filament spools, search for a 3D printer that can handle more than one roll at a time. You can slice gcode files to alternate between colours slowly, engage a specific layer, or even apply a colour to a particular portion of a print-in-place object.

Don’t Neglect the Resolution

A 3D printer resolution is usually referred to as layer height, also known as print resolution or Z height. As a result, 3D printer resolution is measured in microns. For example, 100 microns equals 0.1mm. The higher the resolution, the lower the micron. FDM machines have a lower resolution of 25 microns, and resin-based printers usually have a higher resolution of about 100 microns.

On an FDM printer, you can simply modify the resolution of the final print. When it comes to printing smoothly, the layer height and belt tension are the most critical aspects. Look for a printer with a large number of microns stated in the specs list that is easy to change.

Your Budget and Spending Less Money

If you have any building experience, there is also a possibility of purchasing 3D printer kits or making a self-assembly kit. Then, of course, you’ll have to put the whole printer together yourself. Still, it’s unquestionably the easiest way to get to know your printer inside and out.

 

Some of the best 3D printer kits that you may want to consider buying are Tronxy X5SA, BeeVeryCreative B2X300, Original Prusa i3 MK3S+ and more.

Wrap Up

All printers listed in this article are magnificent. However, you’re probably wondering which is universally the best, especially since you now know how advanced some 3D printers can be.

 

Unfortunately, we can’t point the finger at just one 3D printer. All of the models are excellent in their performance, have unique features, and some of them are pretty cheap. The decision is all yours because we all have different priorities and opinions at the end of the day.

FAQ

Which 3D printer is best for beginners?

Monoprice Voxel is the best 3D printer for beginners. Other best beginner 3D printers are Flashforge Finder, Creality Ender 3 V2, and more.

What's the best 3D printer under $500?

The top three 3D printers are the Artillery Sidewinder X1, Creality Ender 3 V2, and Monoprice Voxel.

What to look for in a 3D printer?

Look for high-quality features like a heated glass bed, a larger build volume, and an easy-to-use user interface.

How to choose the best 3D printer?

Whether it is for home use or professional use, first, you have to know your budget and why you want a 3D printer. The second important part is knowing your preferable 3D printer style, included features, materials, and others.